1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 214Get this manual
ENGINECOOLING AssemblyPro 785 20 Install pump, engaging shaft in drive gearApply LoctiteTM 242 to bolts and torque evenly to 72 in Ibs
21 Assemble carburetor intake manifold and reed assembly in this order: Gasket, spacer, gasket, reed cage, stutter, gasket, and manifold22 .Apply Loctite 242 (Blue) to threads of bolts and studs and install (12) bolts and (6) nutsTorque to 78 inIbs(.9 kg-m)Use care when using Loctite to ensure it doesn't enter manifold or gum up linkages or cables1M
Reed cage and stutterSpacer
23 Install new carburetor gaskets on manifold and install carburetors, guiding oil pump rod carefully through manifoldApply LoctiteTM 242 (Blue) to threads of stud and torque carburetor mounting nuts evenly in steps to 16 ftIbs(2.21 kg-m) Use care when using Loctite to ensure it doesn't enter carbs or gum up linkages or cables1M