1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 212Get this manual
ENGINECOOLING AssemblyPro 785 NOTE: Before installing the cylinder, see honing, measuring and cleaning procedures at the end of this section11 Thoroughly clean gasket material from cylinder base gasket mating surfacesAlways use new base gaskets12 Install base gaskets with sealant facing upSupport piston with piston support blockApply engine oil to cylinder walls, piston, and rings
13 Using ring compressor or your fingers, compress rings in alignment with anti-rotation pins on piston and very carefully slide cylinder down into place14 Apply LoctiteTM 242 (blue) to studs and torque cylinder base nuts in steps to 35-40 ftIbs(4.83-5.52 kg-m) using criss-cross pattern