1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 191Get this manual
ENGINECOOLING AssemblyPolaris Engines
60 If impulse fitting was removed, apply pipe sealant and reinstallTorque to specificationIf crankcase drain plugs were removed, re-install with new sealing washers and torque to specifications
61 Attach impulse line to fitting and fuel pumpTighten clamps securely(Q
co co co co
62 Lubricate and install new O-ring on oil pumpLine up drive spade on pump with slot in flywheel nut and installApply LoctiteTM 242 (blue) to the bolts and torque evenly to specifications