1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 179Get this manual

1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 179

ENGINECOOLING AssemblyPolaris Engines
12 Install Mag end bearing retainer circiip with ends facing upward as shown
13 Place lower crankcase half on upper half aligning circlips and sealsPress into placeIII IC

14 Apply LoctiteTM 242 (blue) to crankcase bolts, install and tighten to specifications following torque pattern shown in illustration at right;, Crankcase Bolt',Torque ,

TWIN CYL

' "Apply' Loctite'242 (Blue)'8mm-22 ft.lbs(3.03 kgm)

1OmlTi28 7:

Back to 1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual