1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 108Get this manual
FUEL SYSTEMCARBURETION Carburetor AssemblyMikuni Assembly
1Reassemble carburetors in reverse order of disassembly keeping in mind the following: Maintain cleanliness at all times, especially watching for paint chips caused by cover removalProper needle valve control arm level, even with jet block surface or up to .015" aboveDo not apply pressure on top of the needle valve assembly during adjustmentUse LoctiteTM 242 to prevent corrosion of bolts in carb blocks and diaphragm coverThO
NOTE: Precautions must be taken to prevent Loctite from interfering with any mechanisms, linkages, diaphragms; entering any cavities, hoses, or orifecesLoctite can plug off passages, or gum up linkages and components ThO
Manually synchronize carburetors (see procedure this section) Center the choke plates after carburetors are installed on engine