1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 44Get this manual
MAINTENANCEfTUNE UP Cable AdjustmentFuel System Reverse Cable Adjustment
The reverse cable does not require periodic adjustmentIf the reverse linkage does not function properly, inspect the cable for damageInspect all linkage, fasteners, brackets, and pivots for wear or damageWhen new cable is installed the cable must be adjusted123Place reverse shift lever in reverse positionLoosen cable adjuster nutsAdjust cable until reverse gate locating collars engage fully into reverse actuator locating slot when slight upward pressure is applied to reverse gateReverse gate must float in the notch and should not be forced inCheck gate locking by pulling up on gate when in down positionMove shift lever to forward positionReverse gate must be above water streamTighten adjuster nuts securelySeal the cable threads and adjuster nuts with marine grade silicone sealant (PN 8560054) and tighten securelyAllow sealant to cure fully before operating craft