1999 Polaris PWC Genesis, Ficht, X-45 Service Manual, Page 302Get this manual
DIAGNOSTIC SOFTWARE Static Tests
Testing Ignition System
NOTE: Do not start the engine during any static testDoing so will cause erratic operation until you shut off the engineType and press the key to test the igni-
Remove all spark plug leads and connect them to spark tester set at air gap specified in the service manual
tion systemThe computer will now prompt you to
install spark checker onto the high tension leadsAfter installing the spark checker, press any key to advance to the next screenIf spark checker is not
available, timing light may be substitutedKeep high tension leads on spark plugs and connect timing light to leadThe light will flash when electricity passes through leadDo not look directly at timing
light or eye damage may occur
PRESS ANY KEY TO CONTINUE