1999 Polaris PWC Genesis, Ficht, X-45 Service Manual, Page 290Get this manual
DIAGNOSTIC SOFTWARE Installing Software 1Locate the diagnostic port on the engine wiring
harnessIt is positioned lothe aft of the EMM on the starboard side of the boatThe port has cover to keep connections cleanRemove the cover 10 access the port Connect the communication cable (PN 2872454) to the diagnostic port on the watercraftNOTE: When you are finished with all testing, make
Diagnostic Cable These are connected during engine operation Diagnostic Cap
8-pin connector EMM
sure you protect the diagnostic port by reinstalling coverConnect the other end of the diagnostic cable to the serial port on the laptop computer2Disconnect the a-pin connector to the EMM and
install the FICHTe EMM Service Power Connector PN 2872456This will power up the EMM
EMM Service Power Connector PN 2872456
Front of Boat