1999 Polaris PWC Genesis, Ficht, X-45 Service Manual, Page 248Get this manual
ELECTRICAL Ignition System TestingPVLGenesis X-4S PVL Ignition Troubleshooting, Cont
b.Check the resistance of the coil without the plug wires installed
Ignition Coil
(do not disconnecllhe primary side of the coil)
SPECIFICATION: 1200101600 ohms (111.3)
2Open the electrical box and check for correct connections between the stator, COl, coils, and terminal boardInspect the wiring for incorrect connections or physical damageA.verify the correct installation of the Yellow stator wire and YellowPurple jumper wire if so equippedaDisconnect the stator from the electrical box at the stator connectorbConnect the negative test lead of the ohm meter to the black wire coming from the stalor and leave it connected for the duration of test 2, c, Connect the positive test lead to an engine ground, Ill4