1999 Polaris PWC Genesis, Ficht, X-45 Service Manual, Page 213Get this manual
HULUDECK, STEERING AND CONTROLS Cable Adjustments Steering Cable Adjustment
Forward 1Remove handlebar padVisually center handlebarsOn Genesis models, insert pin or small screwdriver in handlebar centering hole in handlebarsVerify proper
centering by measuring distance from stop bracket to stop post on each sideMove handlebars left or
Stop Bracket
right until distance on each stop is equalBe sure to
measure at the same points on both sidesSee Ill1
Measurements at "An Must Be Equal 1111 X-45 shown
Place straight edge across horizontal center line of steering nozzle or trim nozzleNOTE: he trim nozzle mounting bolts can be used as reference for the center line on models with Quick TrimSee Ill2