1999 Polaris PWC Genesis, Ficht, X-45 Service Manual, Page 210Get this manual
HULUDECK, STEERING AND CONTROLS Steering CoverSteering Post Steering CoverSteering Post (Handlebar) Removal
1Remove top steering cover (handlebar pad) by
loosening the (4) screws located on underside of pad
Remove Cover
If steering post (handlebar) is to be replaced, remove throttle lever, screws on throttle block, and remove throttle blockIf post is not being replaced disconnect cable from throttle lever
Remove screws (4)
Remove the (3) stop switch screws, separate the
switch and set it aside
Remove steering arm bolt and move arm aside with