1999 Polaris PWC Genesis, Ficht, X-45 Service Manual, Page 193Get this manual
FINAL DRIVEJET PUMPBILGE SYSTEM Pump To Hull Alignment 3Grease the large pump sealing -ring and apply Marine Grade Silicone Sealant (PN
8560054) to the bilge siphon lube(s), cooling water supply tube, and studs (to seal stud in hUll)Install pump4Hold pump inward tightly against hull while an assistanttighlensstud mounting nuts inside hull
ApRly Sealant
Torque evenly in three steps to 28 ftIbs(3.87 kg-m)Tighten 28 ftIbs(3.87 kg-m)