1999 Polaris PWC Genesis, Ficht, X-45 Service Manual, Page 180Get this manual
FINAL DRIVEJET PUMPBILGE SYSTEM Pump DisassemblyInspection 5Remove four (4) mounting boltsPump removal is easier if an assistant pushes the driveshaft out of the engine coupler (inside hull) while the pump is removedNote interlocking tabsThey must be correctly aligned during reassemblyRemove pump and shaft as an assembly7
NOTE: The bearing housing (near engine coupler) should be inspected when pumpdriveshaft is removedOn models with extended pump, remove pump extensionRemove driveshaft from impeller by pulling straight outward
NOTE: If the pump housing, intake scoop, or ride plate must be removed, refer to page 5.23