1999 Polaris PWC Genesis, Ficht, X-45 Service Manual, Page 50Get this manual
MAINTENANCEfTUNE UP
Fuel System StorageEngine Fogging
Engine Fogging ProcedureAll Models
CAunON;" 1
Failure to periorm the following preventive maintenance can result in serious engine corrosion during off season storageIn order to prevent rust and corrosion on internal engine parts (Lecrankshaft, bearings, pistons, rings cylinder walls), Polaris highly recommends the regular use of Polaris fogging oilThe engine should be fogged daily when operated in salt water
Polaris Premium Fogging Oil and Corrosion Inhibitor
PN 2870791
When properly applied, fogging oil coats all internal engine parts for prevention of rust and corrosion, which in turn will extend the service life of the engine1Loosen plug at air intake manifold2Start the engine and spray Polaris fogging oil towards each carburetor throat to ensure that all internal parts are properly coatedSpray fogging oil for two to three seconds in each carburetor throat and repeat until the engine is flooded with fogging oilThen stop the engine immediately Plug