1999 Polaris PWC Genesis, Ficht, X-45 Service Manual, Page 37Get this manual
MAINTENANCEfTUNE UP Cable Adjustments Throttle Cable InspectionAdjustment
Cable Inspection
1Check for smooth throttle opening and closing in all handlebar positionsThrottle operation should be
smooth and lever must return freely without binding23Inspect cable for proper routing, kinks, or damageInspect both ends of cable and replace if frayed, kinked or damaged
Throttle Lever Free Play
Cable Adjustment
Adjustments are made by turning the lock nuts at the carburetor and then fine tuning at the throttle block adjuster bolt
.020.060" (.51.5 mm)
Set idle speed to specificationsadjustment, page 2.17
See idle speed
.020-.060" (.5-1.5 mm)
Measurethroltle lever free play between lever block and lever as shown in Ill1