2008 Honda Aquatrax ARX1500T3/T3D factory service manual, Page 430Get this manual
Insert the safety lanyard lock clip in engine stop switchMeasure the voltage between the Whitelgreen wire terminal (+) of the ECM 33P (Gray) connector of the wire harness side and ground (-1
ECM 33P (Gray) CONNECTOR (wire
TOOL: Test probe
07ZAJ-RDJA110
There should be approximately VIf there is no voltage, check an open circuit in the Whitelgreen wire
Ground the Whitelgreen wire terminal of the ECM 33P (Gray) connector with jumper wireThe warning light and cooling water temperature indicator should blink and the warning buzzer should beepIf the warning light and indicator do not blink and the buzzer does not beep, replace the combination meter