2008 Honda Aquatrax ARX1500T3/T3D factory service manual, Page 421Get this manual
ECM LOCK Remove the front storage box (page 3-5)Release the wire bandDisconnect the combination meter 10P (gray) connector BAND
CONNECTOR Connect the Light greenlblack and Green wire terminals of the 10P (Gray) connector with jumper wireInsert the safety lanyard lock clip in engine stop switchMeasure the voltage between the Light green (+) and Green (-)wire terminalsThere should be approximately VIf there is no voltage, check for an open circuit in the Light green wire between the combination meter and ECMCOMBINATION METER 10P (Gray) CONNECTOR (Wire sidelfemale terminal) Light greedblack Light green
DIAGNOSTIC SWITCH
Remove the front storage box (page 3-5)Release the wire bandDisconnect the combination meter 8P (gray) and 10P (gray) connector