2008 Honda Aquatrax ARX1500T3/T3D factory service manual, Page 420Get this manual
OUTPUT CIRCUIT INSPECTION LIMIT MODE Remove the front storage box (page 3-5)Release the wire bandDisconnect the combination meter 8P (gray) and 10P (gray) connectorBAND
CONNECTOR
Connect the Light green and Green wire terminals of the 10P (Gray) connector with jumper wireInsert the safety lanyard lock clip in engine stop switchMeasure the voltage between the Light green (+) wire terminal of the 8P (Gray) connector and Green [-) wire terminal of the 10P (Gray) connectorThere should be approximately VIf there is no voltage, check for an open circuit in the Light green wire between the combination meter and ECM
CONNECTOR
COMBINATION METER 10P (Gray) and 8P (Gray) CONNECTORS (Wire sidelfemale terminal)
Light green
Light greenlblack
WARNING BUZZER Remove the front storage box (page 3-5)Release the wire bandDisconnect the combination meter 10P (gray) connector