2008 Honda Aquatrax ARX1500T3/T3D factory service manual, Page 359Get this manual
PROPULSION SYSTEM Apply 60 (2.1 oz) of LORD 7452 adhesive or equivalent to the intake lip and the hull as shownADHESIVE
Install the intake lip onto the thrust plate by aligning the tab of the intake lip with the groove of the thrust plateSet the intake lip the hull securelyMake sure that the excess adhesive comes out from the whole mating areaWipe off any excess adhesive using suitable tool by sliding it toward the mating area, making sure that the gap between the intake lip and hull is completely filled with the adhesive and that the mating area is smooth