2008 Honda Aquatrax ARX1500T3/T3D factory service manual, Page 352Get this manual
PROPULSION SYSTEM Install the washerPack the cavities of new bearings with water resistant grease #2Press the inside bearing with the marking facing up until it is fully seated, using the special tools
TOOLS: Driver Attachment, 40 42 mm Pilot, 25 mm
07749-0010000 07746-0010900 07746-0040600
Apply water resistant grease #2 over the inside bearing so the grease is packed between the bearings after installing the outside bearing and install new stopper seal
Press the outside bearing with the marking facing until the depth from the bearing housing end is 9.810.2 (0.390.40 in)