2008 Honda Aquatrax ARX1500T3/T3D factory service manual, Page 348Get this manual
PROPULSION SYSTEM
JET PUMP INSTALLATION
Apply 2.0 (0.07 oz) of water resistant molybdenum disulfide grease to the impeller splinesApply water resistant molybdenum disulfide grease to the lips of new impeller seal and install it into the impeller securelyInstall new O-ringsInstall the two dowel pins into the water jet pump
Apply locking agent to the threads of the jet pump mounting boltsCarefully align the shaft hole in the impeller with the drive shaft, install the jet pump assembly onto the thrust plateInstall the four mounting bolts and tighten them in crisscross pattern in several stepsTORQUE: 22 N-m (2.2 kgf-m, 16 Ibfaft)