2008 Honda Aquatrax ARX1500T3/T3D factory service manual, Page 318Get this manual
GRANKSHAFTIBALANCERIPISTON OIL CLEARANCE INSPECTION
Do not rotate the crankshaft and balancer shaft during inspectionClean off any oil from the bearing inserts and journalsInstall the balancer shafts onto the upper crankcasePut strip of plastigauge lengthwise on each journal avoiding the oil holes
Install the dowel pinsCarefully install the lower crankcase onto the upper crankcaseApply engine oil to the threads and seating surfaces of the 14 main journal bolts and install themThe crankcase has Tighten the 9-mm bolts in several steps according to the numerical order cast on the crankcasethe numbersu'14"cast 117ro TORQUE: 37 N-m (3.8 kgf.m, 27 lbf-ft) the crankcase