2008 Honda Aquatrax ARX1500T3/T3D factory service manual, Page 287Get this manual
ALTERNATORISTARTER CLUTCH -
Check the starter clutch outer and sprag clutch for abnormal wear or damage
STARTERCLUTCHOUTER
SPRAG CLUTCH
ASSEMBLY
Apply engine oil to the sprag clutch contacting surfacesInstall the sprag clutch into the starter clutch outer with the flange side facing the flywheelInstall the starter clutch assembly onto the flywheelSTARTER CLUTCH OUTER
Apply locking agent to the starter clutch torx bolt threads (Coat 6.5 from tip) and install the boltsHold the flywheel with the flywheel holder, being careful not to damage the reluctors on the flywheel, and tighten the boltsTOOL: Flywheel holder 07725-0040001 or equivalent commercially available in U.S.A