2008 Honda Aquatrax ARX1500T3/T3D factory service manual, Page 245Get this manual

ENGINE REMOVALIINSTALLATION Make sure that the side surfaces of the coupler blade are flush with the attachment side surfaceIf they are not flush, adjust the engine position using the shim(s) or by sliding the engine so the alignment is within 0.5 mmIncorrect: Correct:

DRIVE COUPLER

Within 0.5 mm

COUPLER ATTACHMENT

Slowly tighten to After the alignment procedure is completed, tighten

• ATV
• Jet Ski
• Outboard Motors
• Personal Watercraft
• Snowmobiles
• Stern Drives