2008 Honda Aquatrax ARX1500T3/T3D factory service manual, Page 240Get this manual
ENGINE REMOVALIINSTALLATION Prepare 10-mm nut and bolt for use of engine liftingTake care not to Install the 10-mm bolts and nuts into the holes in pinch the hose and the crankcasewire by the sling Hook sling to the lifting boltsUsing chain hoist when lifting the or other suitable equipment, slightly lift the engine engine to ease the remaining component removal
RIGHT SIDE:
10 mm BOLTS
Record the location and number of shims for installation reference
Remove the shims between the engine and rubber mounts
Be careful not to Make sure the removed hoses and wires do not damage the deck interfere with the engine components to avoid damwhen removing tne aging themengine Lift the engine then tilt it so that it can be removed