2008 Honda Aquatrax ARX1500T3/T3D factory service manual, Page 226Get this manual
FUEL SYSTEM (Programmed Fuel Injection) -
EOP (HIGH) SWITCH
REMOVALIINSTALLATION
Remove the left side panel (page 3-7)Disconnect the EOP (High) switch 2P (Gray) connectorRemove the EOP (High) switchInstall and tighten the EOP (High) switch,
TORQUE: 22 N-m (2.2 kgf-m, 16 Ibf-ft)
Connect the EOP (High) switch 2P (Gray) connectorStart the engine according to the flushing procedure (page 5-3)Check that the oil pressure indicator turns off after or secondsIf the oil pressure indicator stays on, stop the engine immediately and determine the cause (page 19-16)Install the left side panel (page 3-71,
ING WASHER