2008 Honda Aquatrax ARX1500T3/T3D factory service manual, Page 118Get this manual
LUBRICATION SYSTEM ASSEMBLY
When the oil pump drive joint is removed from the oil pump shaft, install as follows: Apply locking agent to the driven joint bolt threads (Coat 6.5 mm from tip)Install the driven joint onto the oil pump shaft and tighten the bolt
TORQUE: 17 N-m (1.7 kgf-m, 13 Ibf-ft)
Apply light coat of clean engine oil to all partsInstall the following:
- oil pump shaftdrive pininner rotor while aligning its groove with the