2008 Honda Aquatrax ARX1500T3/T3D factory service manual, Page 110Get this manual
LUBRICATION SYSTEM
SERVICE INFORMATION
GENERAL
Used engine oil may cause skin cancer if repeatedly left in contact with the skin for prolonged periodsAlthough this IS unlikely unless you handle used oil on daily basis, it is still advisable thoroughly wash your hands with soap and water as soon as possible after handling used oilThis section covers service of the oil tank, oil pump and oil coolerThe service procedures in this section must be performed with the engine removedFor oil level check, oil change and filter replacement (page 4-12)If the EOP (High) switch detects an engine oil pressure below 216 kPa (2.2 kgcm2, 31 psi), the ECM lights the oil pressure warning light and limits the engine speed to 3,000 rpm to prevent the engine damageHowever, if the EOP (Low) switch detects an engine oil pressure below 20 kPa (0.2, kgcm2, psi), the fail-safe function stops the engine
SPECIFICATIONS
Engine oil capacity
STANDARD
After draining After draininglfilter change After disassembly 4.2 liters (4.4 US qt, 3.7 Imp qt) 4.3 liters (4.5 US qt, 3.8 Imp qt) 5.3 liters (5.6 US qt, 4.7 Imp qt) Pro Honda GN4 4-stroke oil (U.S.A and Canada) or equivalent motor oil API service classification: SG or Higher JASO 903 standard: Viscosity: SAE 10W-30 294 kPa (3.0 kgfcm2, 43 psi) at 3,000 rpm(80C1760F 0.15 (0.006) 0.150.23 (0.0060.009) 0.040.09 (0.0020.004) 95-101 'C(203-217OF) 1-5r0 4.2 (0.17) -3-