2008 Honda Aquatrax ARX1500T3/T3D factory service manual, Page 99Get this manual
MAINTENANCE INSPECTION AND ADJUSTMENT Check that the handlebar moves freelv from side-tosideIf the handlebar moves unevenly, binds, or has ver tical movement, inspect around the steering sh (page 15-7)
Position the handlebar straight aheadCheck that the steering nozzle is centered by measuring the distance between the edges of the steering nozzle (projection) and jet nozzle (rib) on right and left sideSPECIFIED DISTANCE: 57 (2.2 in) minimum Make sure that the measured distances are equal both sides
STEERING NOZZLE
JET NOZZLE
LOCKNUT
PROJECTION
Adjust the steering alignment as followsLoosen the cable joint lock nut and disconnect the steering cable from the nozzle by removing the joint pivot nut and washerThecablejoint Turn the cable joint as required and connect the must be screwedin steering cable with the joint pivot nut and washerat least mrn Tighten the joint pivot nut to the specified torque( 3in) '