2008 Honda Aquatrax ARX1500T3/T3D factory service manual, Page 97Get this manual
MAINTENANCE If the proper bucket position cannot be obtained, perform the adjustment at the reverse lever sideRemove the front storage box (page 3-5)Loosen the cable joint lock nutRemove the E-clip and disconnect the reverse cable from the reverse leverThe cable joint must be screwed in so the clearance between the cable end and joint hole is less than mm (0 in)
CABLE JOINT
Turn the cable joint as required and connect the reverse cableAfter adjustment, secure the cable with the E-clip and tighten the lock nutTORQUE: 4.0 N-m (0.41 kgf-m, 3.0 Ibf-ft) LOCK NUT