2008 Honda Aquatrax ARX1500T3/T3D factory service manual, Page 94Get this manual
MAINTENANCE
DRAIN PLUG
Check the bilge drain plugs for cracks or damage and the mounting screws are tightened securelyClean the O-ring and threads to remove any dirt or sand and check them for wear or damage
BEARING HOUSING
Remove the coupler cover (page 3-17)Remove the Check the boot and support areas of the bearing watercraft from the housing for cracks or deteriorationwarerimmediately Check for water leakage from the bearing housing if there is any water (e.g drive shaft seals) with the watercraft in the entering the hull Water