2008 Honda Aquatrax ARX1500T3/T3D factory service manual, Page 79Get this manual
MAINTENANCE Adjust the free play as follows: Remove the seats (page 3-5)Slide the sleeve back to expose the adjuster, Loosen the lock nuts, turn the adjuster as required and tighten the lock nuts the specified torqueADJUSTER
TORQUE: 5.5 N-m (0.56 kgfam, 4.0 Ibf-ft)
Reinstall the sleeve properlyRecheck the throttleand install the seats (page 3-5)
THROTTLE BODY
Remove the seats (page 3-5)To lubricate and rustproof the inside of the throttle body, proceed as follows after confirming that the engine is stopped and cool1Remove the maintenance port cap2Insert the spray nozzle of water-displacement corrosion-proof lubricant (without Teflon or molybdenum additives, such as CRC 6-56 or an equivalent) into the maintenance port3Close the throttle