2004-2007 Honda Aquatrax ARX1200N3/T3/T3D Factory Service Manual, Page 426Get this manual
STEERINGREVERSE SYSTEM STEERING NOZZLE INSTALLATION Apply water resistant molybdenum disulfide grease to the steering nozzle pivotsApply locking agent to the threads of the steering nozzle pivot boltsInstall the steering nozzle with the pivot bolts and collars, and tighten themTORQUE: 22 Nm (2.2 kgfm, 16 lbfft) Apply water resistant molybdenum disulfide grease to the steering cable joint pivotConnect the steering cable onto the joint bolt on the steering nozzleInstall the joint nut with the washer and tighten itTORQUE: 9.8 Nm (1.0 kgfm, lbfft) Turn the steering nozzle to the left fully (so the inner cable is exposed from the outer cable) and apply water-displacement corrosion-proof lubricant (without Teflon or molybdenum additives, such as CRC 6-56 or an equivalent) to the cable innerPerform the steering cable adjustment if necessary (page 4-23)
REVERSE BUCKET
GUIDE NUT
PIVOT BOLTS
JOINT NUT