2004-2007 Honda Aquatrax ARX1200N3/T3/T3D Factory Service Manual, Page 422Get this manual
STEERINGREVERSE SYSTEM Install the wire boot over the steering shaft groove properly and secure it with the boot band
WIRE BANDS BOOT BAND
THROTTLE CABLE Connect the warning buzzer 2P (white) and handlebar switch 4P (white) connectorsSecure the wires the wire bands properly (page 1-31 or 1-52)
BOOT WIRE BANDS
CONNECTORS Install the joint nut of the throttle cable into the lever bracketApply water-displacement corrosion-proof lubricant (without Teflon or molybdenum additives, such as CRC 6-56 or an equivalent) to the throttle cable end and connect the cable to the throttle leverSet the return spring onto the lever bracket by inserting the long end into the setting holeCarefully align the short end of the spring with the setting hole in the lever, then install the throttle lever onto the bracketApply locking agent to the threads of the lever pivot bolt, and install the pivot bolt and nutMake sure the throttle lever operates smoothly without binding and tighten the pivot boltTORQUE: 3.9 Nm (0.4 kgfm, 2.9 lbfft) Adjust the following: throttle lever free play (page 4-6) steering alignment (page 4-23) Install the following: storage box (page 3-8) seats (page 3-4) handlebar cover (page 3-11) SPRING PIVOT NUT CABLE