2004-2007 Honda Aquatrax ARX1200N3/T3/T3D Factory Service Manual, Page 420Get this manual
STEERINGREVERSE SYSTEM STEERING SHAFT INSTALLATION Apply water resistant molybdenum disulfide grease to the sliding surfaces of the steering shaft and to the sliding area of the shaft retainerInstall the three washers onto the stud boltsSet the shaft retainer into the shaft groove and install the steering shaftApply locking agent to the threads of the retainer nutsInstall the three nuts with the washers and tighten themTORQUE: 6.9 Nm (0.7 kgfm, 5.1 lbfft) STEERING SHAFT
NUTS AND WASHERS
Tighten the joint bolt after connecting the steering cable