2004-2007 Honda Aquatrax ARX1200N3/T3/T3D Factory Service Manual, Page 417Get this manual
STEERINGREVERSE SYSTEM Install the throttle lever bracket and holder by aligning the locating pin on the holder with the hole in the handlebarTighten the upper screw first, then the lower screwTORQUE: 2.9 Nm (0.3 kgfm, 2.2 lbfft) GRIP HOLE
HOLDER Install the switch housings by aligning the locating pin with the hole in the handlebarTighten the forward screws first, then the rear screwTORQUE: 2.0 Nm (0.2 kgfm, 1.4 lbfft) Install the handlebar cover (page 3-11)HOLE PIN
SWITCH HOUSING
STEERING SHAFT
STEERING SHAFT REMOVAL
Remove the following: handlebar cover (page 3-11) seats (page 3-4) storage box (page 3-8) Slide the cable boot off the adjusterLoosen the lock nut and turn the adjuster to loosen the throttle cable