2004-2007 Honda Aquatrax ARX1200N3/T3/T3D Factory Service Manual, Page 410Get this manual
PROPULSION SYSTEM Apply 80 (2.8 oz) of LORD 7452 adhesive or equivalent to the intake lip and the hull as shownInstall the intake lip onto the thrust plate and hull securelyThen check to be sure that adhesive overflows from the whole mating areaWipe off any overflow adhesive so that the mating area is smooth (remove any overflow adhesive on the intake grate installing surface)ADHESIVE 80 (2.8 oz) INTAKE LIP Connect the cooling water hose and tighten the hose clamp in the direction as shownConnect the bilge hose and secure it with new hose bandCut off any excess bandTHRUST PLATE HULL