2004-2007 Honda Aquatrax ARX1200N3/T3/T3D Factory Service Manual, Page 400Get this manual
PROPULSION SYSTEM Install the two dowel pins into the thrust plateDOWEL PINS
Apply locking agent to the threads of the jet pump mounting boltsCarefully align the shaft hole in the impeller with the drive shaft, install the jet pump assembly onto the thrust plateInstall the four mounting bolts and tighten them in crisscross pattern in several stepsTORQUE: 22 Nm (2.2 kgfm, 16 lbfft)
JET PUMP ASSEMBLY Apply locking agent to the threads of the jet nozzle boltsInstall the water jet nozzle with the four boltsTORQUE: 22 Nm (2.2 kgfm, 16 lbfft) Connect the bilge hose and secure it with new hose bandCut off any excess bandInstall the steering nozzle and reverse bucket (page 15-15)HOSE BAND