2004-2007 Honda Aquatrax ARX1200N3/T3/T3D Factory Service Manual, Page 331Get this manual
ALTERNATORSTARTER CLUTCH
ALTERNATOR STATOR
REMOVAL
Remove the front crankcase cover (page 6-9)Remove the socket bolt and wire clampRemove the alternator stator wire grommet from the crankcase coverRemove the four socket bolts and alternator stator from the crankcase coverCLAMP STATOR
INSTALLATION
Install the alternator stator onto the crankcase cover and tighten the four socket boltsTORQUE: 12 Nm (1.2 kgfm, lbfft) GROMMET
Apply silicone sealant to the wire grommet seating surface and install the grommet into the crankcase cover grooveInstall the wire clamp, aligning the groove with the boss of the crankcase cover, and tighten the socket boltTORQUE: 9.8 Nm (1.0 kgfm, lbfft) Install the front crankcase cover (page 6-14)GROMMET