2004-2007 Honda Aquatrax ARX1200N3/T3/T3D Factory Service Manual, Page 322Get this manual
CYLINDER HEADVALVE Before installing the water hose joint, check the anode (page 4-17)
Install new O-ring into the hose joint grooveInstall the water hose joint with the bolts and stay, and tighten themO-RING
HOSE JOINT
STAY ANODE Install the ECT sensor with new O-ringTORQUE: 18 Nm (1.8 kgfm, 13 lbfft) Connect the ECT sensor and camshaft position sensor 2P connectorsInstall the following: camshafts (page 10-8) exhaust manifold (page 13-11) throttle body (page 8-102) ECT SENSOR O-RING
CONNECTORS
CAMSHAFT INSTALLATION
Install the valve shims in their original locationsCoat the outer surface of the valve lifters with molybdenum oil solutionInstall the valve lifters in their original lifter bores, being careful not to damage the sliding surfaces of the lifters and bores