2004-2007 Honda Aquatrax ARX1200N3/T3/T3D Factory Service Manual, Page 233Get this manual
FUEL SYSTEM (Programmed Fuel Injection) INSTALLATION Check the joint pipe contact area for dirt, and clean if necessaryInsert new retainer into the connector if the retainer is damaged, or after replacing the fuel pump replacing the fuel feed hose removing the retainer from the joint pipeWhen using new retainer, remove the old retainer from the joint pipe and install the new retainer into the connector, aligning the pawls with the connector groovesInstall new rubber cover onto the fuel joint properly as shownPress the connector onto the joint pipe until both retainer pawls lock with clicking sound If it is hard to connect, put small amount of new engine oil on the joint pipe endMake sure the connection is secure and the pawls are firmly locked into placeConnection with new retainer Reconnection with the existing retainer
RETAINER
RETAINER
RUBBER COVER