2004-2007 Honda Aquatrax ARX1200N3/T3/T3D Factory Service Manual, Page 232Get this manual
FUEL SYSTEM (Programmed Fuel Injection)
FUEL LINE INSPECTION
FUEL PRESSURE RELEASE
Before disconnecting the fuel feed hose, open the fuel fill cap to release the pressure in the fuel tank and release the fuel pressure by disconnecting the fuel feed hose at the fuel rail
Remove the seats (page 3-4)Remove the fuel feed hose from the clipRemove the two fuel feed hose joint boltsCover the fuel feed hose joint with rag or shop towelSlowly remove the hose joint from the fuel rail while releasing the fuel pressure and catch the remaining fuel using approved gasoline container
ARX1200T3T3D shown: CLIP HOSE JOINT
FEED HOSE FUEL RAIL Coat new O-ring with oil and install it into the fuel feed hose joint grooveInstall the hose joint into the fuel railInstall and tighten the hose joint boltsTORQUE: 10 Nm (1.0 kgfm, lbfft) Install the feed hose onto the clamp