2004-2007 Honda Aquatrax ARX1200N3/T3/T3D Factory Service Manual, Page 139Get this manual
LUBRICATION SYSTEM
SERVICE INFORMATION
GENERAL
Used engine oil may cause skin cancer if repeatedly left in contact with the skin for prolonged periodsAlthough this is unlikely unless you handle used oil on daily basis, it is still advisable to thoroughly wash your hands with soap and water as soon as possible after handling used oil This section covers service of the oil tank, oil pump and oil coolerThe service procedures in this section must be performed with the engine removedFor oil level check, oil change and filter replacement, refer to section (page 4-12)If the high oil pressure switch detects an engine oil pressure below 216 kPa (2.2 kgcm2, 31 psi), the ECM lights the oil pressure warning light and limits the engine speed to 3,000 rpm to prevent the engine damageHowever, if the low oil pressure switch detects an engine oil pressure below 20 kPa (0.2, kgcm2, psi), the fail-safe function stops the engine
SPECIFICATIONS
Engine oil capacity ITEM ARX1200T3 T3D After draining After drainingfilter change After disassembly After draining After drainingfilter change After disassembly STANDARD 4.2 liter (4.4 US qt, 3.7 lmp qt) 4.3 liter (4.5 US qt, 3.8 lmp qt) 5.3 liter (5.6 US qt, 4.7 lmp qt) 4.0 liter (4.2 US qt, 3.5 lmp qt) 4.1 liters (4.3 US qt, 3.6 lmp qt) 5.0 liter (5.3 US qt, 4.4 lmp qt) Pro Honda GN4, HP4 (without molybdenum additives) or HP4M (with molybdenum additives) 4-stroke oil or equivalent motor oil API service classification: SG or Higher JASO 903 standard: MA or MB Viscosity: SAE 10W-40 294 kPa (3.0 kgfcm2, 43 psi) at 3,000 rpm(80!C176!F) 0.15 (0.006) 0.15 0.22 (0.006 0.009) 0.04 0.09 (0.002 0.004) Unit: mm (in) SERVICE LIMIT