2004-2007 Honda Aquatrax ARX1200N3/T3/T3D Factory Service Manual, Page 135Get this manual
FLUSHING AND STORAGE REMOVAL FROM STORAGE Before starting the engine, remove the seats and storage box to ventilate the engine compartment1Lubricate the control cables and check the following for smooth operation throttle lever (page 4-5) handlebar and steering nozzle (page 4-22) reverse lever and reverse bucket (page 4-20) 2Lubricate the following engine components throttle body (page 4-6) turbocharger (ARX1200T3T3D: wastegate link; page 4-17) 3Check all the hoses for loose connections or damage (page 4-5 and 4-16)Make sure that the battery is in good condition
4Install the battery (page 16-5)5Fill the fuel tank6Flush the cooling system and check the engine operation (page 5-3)Also check for water, oil and exhaust leakage7If the watercraft has been stored for more than months, change the engine oil (page 4-12)8Check the bilge drain plugs (page 4-19)9Check the fire extinguisher is not beyond its expiration date and charge or replace, if necessaryInstall the body panels and seats (page 3-3)
IF THE WATERCRAFT IS SUBMERGED