2004-2007 Honda Aquatrax ARX1200N3/T3/T3D Factory Service Manual, Page 128Get this manual
MAINTENANCE INSPECTION AND ADJUSTMENT Check that the handlebar moves freely from side-tosideIf the handlebar moves unevenly, binds, or has vertical movement, inspect around the steering shaft (page 15-6)
Position the handlebar straight aheadCheck that the steering nozzle is centered by measuring the distance between the edges of the steering nozzle (projection) and jet nozzle (rib)Measure on both the left and right sides of the nozzle as shownAdjust the steering alignment as followsLoosen the cable joint lock nut and disconnect the steering cable from the nozzle by removing the joint nut and washerThe cable joint must be screwed in at least mm (0.3 in)