2004-2007 Honda Aquatrax ARX1200N3/T3/T3D Factory Service Manual, Page 119Get this manual
MAINTENANCE OIL CHANGE Change the oil with the engine warm to assure complete drainingSecure the watercraft on stand or trailerRemove the rear tray (page 3-5)Warm up the engine for few minutes according to the flushing procedure (page 5-2)Turn off the water and stop the engineRemove the oil filler capdipstick and the drain pipe capPump out the engine oil with commercially available Fluid Evacuator from the oil filler hole and drain pipe, to drain the oil tank and oil panAfter draining the oil completely, install the drain pipe cap and pour the recommended oil (page 4-13) into the oil tank through the filler holeOIL CAPACITY: ARX1200T3T3D (turbocharger model): 4.2 liters (4.4 US qt, 3.7 Imp qt) at draining 4.3 liters (4.5 US qt, 3.8 Imp qt) at drainingfilter change 5.3 liters (5.6 US qt, 4.7 Imp qt) at disassembly ARX1200N3: 4.0 liters (4.2 US qt, 3.5 Imp qt) at draining 4.1 liters (4.3 US qt, 3.6 lmp qt) at drainingfilter change 5.0 liters (5.3 US qt, 4.4 Imp qt) at disassembly Install the filler capdipstickCheck the oil level (page 4-12)FILLER HOLE DRAIN PIPE