2004-2007 Honda Aquatrax ARX1200N3/T3/T3D Factory Service Manual, Page 33Get this manual
GENERAL INFORMATION LOCATION Thrust plate bolt threads Cooling water cap threads Impeller housing bolt threads (ARX1200N3 only) Stator cap socket bolt threads Jet pump mounting bolt threads Water jet nozzle bolt threads Intake grate bolt threads Ride plate bolt threads Driven coupler bolt threads and seating surface Impeller shaft O-ring (B) Impeller shaft bearing rotating area Impeller shaft water seal lips Water jet stator inside (between bearings) Stator cap O-ring Stator cap inside Drive shaft bearing housing oil seal lips Drive shaft bearing rotating area Drive shaft bearing housing (between bearings) Drive shaft bearing housing grease nipple Front hood hinge pivot Off-throttle steering limit switch lever sliding area and pivot Throttle cable (throttle drum rolling area) Driven coupler splines Impeller shaft collar O-ring (A) Impeller shaft threads Impeller splines Impeller seal lips Steering shaft sliding surfaces Steering shaft retainer sliding area Steering cable joint pivot (each end) Steering nozzle pivots Reverse lever pivot and guide groove Reverse cable joint pivot (each end) Reverse bucket arm pivot and bushings Reverse bucket pivots Steering cable Reverse cable Throttle cable (throttle lever side) Water resistant grease #2 MATERIAL Locking agent REMARKS