Yamaha Outboards 3P Service Manual, Page 12Get this manual
ISPEC rr- I C200000
GENERAL SPECIFICATIONS
GENERAL SPECIFICATIONS
Item Overall length Overall width Overall height Boat transom height Weight Maximum output Average maximum power Speed range at full-throttle Maximum fuel consumption Engine type Number of cylinder Total displacement Bore and stroke Compression ratio Spark plug Number of carburetor Carburetor starting system Intake system Scavenging system Exhaust system Lubrication system Cooling system Ignition system Starting system Fuel Fuel tank capacity Mixing ratio Engine oil type Gear oil type Gear oil quantity Trim angle Tilt-up angle Shallow water angle Steering angle Transmission Gear ratio Reduction system Clutch type Propeller direction Propeller drive system Propeller series mark Propeller (Number of blades diameter pitch) in (US qt, Imp qt) (NGK) Unit mm mm mm mm (in) (in) (in) (in) 375 (14.8) 285 (11.2) 996 (39.2) 1,123 (44.2) 381 (15.0) 508 (20.0) 16.5 (36.3) 17.5 (38.5) (3)5,000 (3)5,000 4,5005,500 2.0 (1.9, 2.3) Two stroke 70 (4.3) 46 42 (1.8 1.7) 6.9 B-6HS10 Choke Reed valve Loop charged Under water Pre-mix Water C.D.IManual Regular gasoline 1.35 (1.28, 1.53) 100Yamalube two-cycle outboard oil Gear-case lube (Hypoid SAE #90) 75 (2.5, 2.6) 4,8,1216,20 75 32,44 360 Forward-Neutral 2.08 (2713) Straight bevel gear Clutch dog Clockwise Spline BS x7-14 7-14 7-14 7-14 8-14 Model 3MHP