Yamaha F100B F100C Outboards Factory Service Manual, Page 255Get this manual
Power trim and tilt motor (F100B)Bleeding the power trim and tilt unit (F100B) 7Install the reservoir cap, and then tighten it to the specified torqueReservoir cap: Nm (0.7 kgfm, 5.1 ftlb) 2Place the power trim and tilt unit in an upright position3Check the fluid level in the reservoirNOTE: The fluid level should be at the brim of the filler holeBleeding the power trim and tilt unit (F100B)
Not installed