Yamaha F100B F100C Outboards Factory Service Manual, Page 206Get this manual
BRKT Power trim and tilt motor (F100B) 7-42 Disassembling the power trim and tilt motor7-44 Checking the power trim and tilt motor 7-45 Assembling the power trim and tilt motor 7-46 Installing the power trim and tilt motor.7-47 Bleeding the power trim and tilt unit (F100B)7-48 Not installed7-48 Checking the hydraulic pressure 7-49 Installing the power trim and tilt unit 7-51 Built-in 7-52 Upper case (F100C)7-53 Disassembling the oil pump7-59 Checking the oil pump 7-59 Assembling the oil pump .7-59 Disassembling the oil pan7-60 Checking the oil strainer 7-60 Assembling the oil pan 7-60 Installing the upper case7-62 Swivel bracket and clamp brackets (F100C) 7-63 Removing the steering arm 7-64 Installing the steering arm 7-64 Clamp brackets (F100C) 7-65 Removing the clamp brackets .7-67 Installing the clamp brackets 7-67 Adjusting the trim sensor cam .7-68 Power trim and tilt unit (F100C) 7-69 Removing the power trim and tilt unit 7-70 Installing the power trim and tilt unit 7-70 Tilt cylinder and trim cylinder (F100C).7-71 Disassembling the tilt cylinder .7-75 Disassembling the trim cylinder.7-75 Checking the tilt cylinder and trim cylinder 7-75 Assembling the trim cylinder 7-76 Assembling the tilt cylinder 7-78 Gear pump (F100C) 7-80 Disassembling the gear pump .7-83 Checking the valves 7-83 Checking the filters 7-84 Checking the gear pump .7-84 Assembling the gear pump 7-84